FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Trunk Opener Switch › Inspection › Notes

Trunk Opener Switch: Inspection: Notes

  1. Disconnect the trunk opener button connector.
  2. Measure the resistance between trunk opener button terminals.

    Preparation tool: 

    Circuit tester 

    Fig 1: Identifying Trunk Opener Button Terminals
    G06653910Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    4 - 2 Open Less than 1 Ω
    Close 1 MΩ or more
  3. Replace the trunk opener button if the inspection result is not within the standard value.
About FixVault