Basic Diagnostic Procedure: Procedure

Step	Check	Yes	No
1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how the trouble occurred.	Did you interview the customer?	Go to step 2 .	Interview the customer. Refer to CHECK .
2 CHECK LAN SYSTEM. Inspect LAN system. Refer to PROCEDURE .	Is there any fault?	Perform the inspection according to the diagnosis for LAN system.	Go to step 3 .
3 CHECK POWER SEAT MEMORY SYSTEM. Using the Subaru Select Monitor, read DTC of power seat memory system. Refer to OPERATION .	Is DTC displayed?	Perform the diagnosis according to DTC. Refer to LIST .	Go to step 4 .
4 CHECK THE LIST OF TROUBLE SYMPTOMS. Check "TROUBLE SYMPTOM" for the power seat system. Refer to TROUBLE SYMPTOM .	Does the symptom apply?	Perform the diagnosis according to the inspection procedures.	Currently, the system is normal. A temporary poor contact may be a possible cause. Therefore, check the harness connector.