FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Rear Gate Glass › Removal

Rear Gate Glass: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. < Refer to REMOVAL , Rear Gate Trim. >
  3. Remove the rear gate garnish. < Refer to REMOVAL , Rear Gate Garnish. >
  4. Remove the rear wiper arm and rear wiper motor. < Refer to REMOVAL , Rear Wiper Motor. >
  5. Disconnect the rear defogger connector and radio antenna connector.
  6. Remove the rear gate glass in the same procedure as for windshield glass. < Refer to REMOVAL , Windshield Glass. >
About FixVault