Steering Switch: Inspection
- Disconnect the steering switch connector.
- Measure the resistance between steering switch terminals.
Preparation tool:
Circuit tester
Terminal No. Inspection conditions Standard 3 - 2 (UP)
i/SET
(DOWN)All OFF Approx. 1 MΩ or more 3 - 2 (UP) ON Less than 1 Ω 3 - 2 i/SET ON Approx. 1, 000 Ω 3 - 2 (DOWN) ON Approx. 3, 670 Ω - Replace the steering switch if the inspection result is not within the standard value.