FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Electrical › Horns › Horn System › Horn › Inspection › Check Horn Assembly

Check Horn Assembly

  1. Remove the horn assembly (Hi pitch side and Lo pitch side). Refer to REMOVAL .
  2. Check the horn sounds when applying the battery voltage to the horn assembly.
    Fig 1: Checking Horn Sounds
    G06653677Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    1 (+) - Horn case (-) Connect battery to the terminals Sounds
  3. If it does not operate normally, replace the horn assembly.
About FixVault