FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine Mechanical (H4DO) › Chain Cover › Disassembly

Chain Cover: Disassembly

  1. Remove the oil filler cap.
    Fig 1: Locating Oil Filler Cap
    G08580098Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine oil filter and the oil pump union. Refer to REMOVAL .
  3. Remove the oil pressure switch. Refer to REMOVAL .
  4. Remove the engine oil temperature sensor. Refer to REMOVAL .
  5. Remove the oil control solenoid. Refer to REMOVAL .
  6. Remove the camshaft position sensor. Refer to REMOVAL .
  7. Remove the actuator cover from chain cover.
    Fig 2: Locating Actuator Cover Mounting Bolts
    G08580099Courtesy of SUBARU OF AMERICA, INC.
About FixVault