FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H4DO) › Main Relay › Removal

Main Relay: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08579605Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the back panel - pocket. Refer to REMOVAL .
  3. Remove the main relay from the relay block on the back side of the glove box.
    Fig 2: Locating Main Relay
    G08579743Courtesy of SUBARU OF AMERICA, INC.
About FixVault