FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 17 (Automatic Transaxle) › Reduction Drive Gear › Removal

Reduction Drive Gear: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. < Refer to REMOVAL , Automatic Transmission Assembly. >
  2. Separate the extension case from the transmission case. < Refer to REMOVAL , Extension Case. >
  3. Remove the reduction driven gear. < Refer to REMOVAL , Reduction Driven Gear. >
  4. Using the ST, extract the reduction drive gear assembly.

    ST1 499737100 PULLER SET

    ST2 899524100 PULLER SET

    Fig 1: Extracting Reduction Drive Gear Assembly Using Special Tool
    G08564034Courtesy of SUBARU OF AMERICA, INC.
About FixVault