Wheel Alignment: Inspection: Caster

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Inspection

Place the front wheel on the turning radius gauge. Make sure the ground contact surfaces of the front and rear wheels are at the same height.
Set the adapter into the center of wheel, and then set the wheel alignment gauge.

Fig 1: Inspecting Caster Using Alignment Gauge, Turning Radius Gauge And Adapter
Courtesy of SUBARU OF AMERICA, INC.

Measure the caster angle in accordance with the operation manual for wheel alignment gauge.

Model	Caster
All models	5°25'