FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 39 (LAN Communication System (Diagnostics)) › Clear Memory Mode › Operation

Clear Memory Mode: Operation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On «Main Menu» display, select {Each System Check}.
  2. On «System Selection Menu» display, select {Integ. unit mode}.
  3. Press the [OK] key after the information of body integrated unit type is displayed.
  4. On «Integ. unit mode failure diag» display, select {Clear Memory} and press the [OK] key.
    Display Contents to be displayed
    Clear Memory? Clear function of DTC and freeze frame data
  5. When "Done" is shown on the display screen, turn the ignition switch to OFF.
    NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
About FixVault