FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 40 (Anti-Theft System - Security And Locks) › Front Hood Lock Assembly › Installation

Front Hood Lock Assembly: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install each part in the reverse order of removal.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description". < Refer to  FRONT HOOD LOCK AND REMOTE OPENERS  , COMPONENT, General Description. > 

    NOTE: Apply grease to the movable part.
  2. Adjust the fog light beam. < Refer to FOG LIGHT AIMING , ADJUSTMENT, Front Fog Light Assembly. >
About FixVault