FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 5 (Tire Pressure Monitoring System (TPMS) (Diagnostics)) › Clear Memory Mode › Operation

Clear Memory Mode: Operation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On «Main Menu» display, select {Each System Check}.
  2. On «System Selection Menu» display, select {Tire pressure monitor}.
  3. After the {Tire pressure monitor} is displayed, select [OK].
  4. On «Tire pressure monitor diagnosis» display, select {Clear Memory}.
  5. When "Done" and "Turn off the ignition switch." are shown on the display screen, turn the Subaru Select Monitor and the ignition switch to OFF.
    NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
About FixVault