FixVault

Rear Wiper Motor: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install each part in the reverse order of removal.
  2. As shown in the figure, make sure that the diamond mark of the pivot cap is facing upward.
    Fig 1: Identifying Pivot Cap Placing Position
    G05957793Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description". < Refer to  REAR WIPER  , COMPONENT, General Description. >