Power Window Control Switch: Removal: Sub-Switch

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power window switch panel.

Fig 1: Identifying Power Window Switch Panel With Fasteners
Courtesy of SUBARU OF AMERICA, INC.
1. Open the cover and remove the screws.
2. Lift up the tip of switch panel by using a plastic remover.
  
  Fig 2: Identifying Cutout Portion
  Courtesy of SUBARU OF AMERICA, INC.
3. Disengage the end face tabs by using a plastic remover.
  
  Fig 3: Disengaging End Face Tabs By Using Plastic Remover
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the power window switch panel.
Disconnect the power window sub-switch connector.
Remove the screws to remove the power window sub-switch assembly.