Remote Control Mirror Switch: Inspection
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the remote control mirror switch connector.
- Check the resistance between remote control mirror switch terminals.
Courtesy of SUBARU OF AMERICA, INC.
- Switch the change over switch to the right side.
Switch position Terminal No. Standard OFF - 1 MΩ or more UP 8 and 3, 6 and 7 Less than 1 Ω DOWN 8 and 6, 3 and 7 Less than 1 Ω LEFT 8 and 2, 6 and 7 Less than 1 Ω RIGHT 8 and 6, 2 and 7 Less than 1 Ω - Switch the change over switch to the left side.
Switch position Terminal No. Standard OFF - 1 MΩ or more UP 8 and 4, 6 and 7 Less than 1 Ω DOWN 8 and 6, 4 and 7 Less than 1 Ω LEFT 8 and 5, 6 and 7 Less than 1 Ω RIGHT 8 and 6, 5 and 7 Less than 1 Ω - Folding switch
Switch position Terminal No. Standard Folding 8 and 9, 7 and 10 Less than 1 Ω Unfolding 8 and 10, 7 and 9 Less than 1 Ω
- Switch the change over switch to the right side.
- Replace the remote control mirror switch if the inspection result is not within the standard value.