FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 9 (Continuously Variable Transaxle (CVT)) › Reduction Driven Gear › Removal

Reduction Driven Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Remove the extension case. Refer to REMOVAL .
  3. Remove the transfer clutch assembly. Refer to REMOVAL .
  4. Remove the transfer driven gear assembly. Refer to REMOVAL .
  5. Remove the parking pawl. Refer to REMOVAL .
  6. Remove the reduction driven gear assembly.
    Fig 1: Identifying Reduction Driven Gear Assembly
    G08317930Courtesy of SUBARU OF AMERICA, INC.
About FixVault