Immobilizer System
- Check that the engine starts with all keys that are equipped on vehicle.
- 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light is blinking. (model without keyless access function)
- Immediately after turning ignition switch from ON to ACC or OFF, or when opening/closing a door while the ignition switch is in ON or ACC, check that the security indicator light is blinking. (model with keyless access function)
- For the model for Canada, execute Each System Check > Integ. unit mode > "SCU Collation Mode" on SSMIII to check [Collation OK (no error)] is displayed.
NOTE:
If malfunctions occur, refer to IMMOBILIZER SYSTEM (DIAGNOSTICS)
.