Seat Belt Switch Inspection

Preparation tool: 

Circuit tester 

• Driver's seat

Check the resistance between the terminals when the inner belt assembly is in each of the following operation conditions.

Terminal No.	Inspection conditions	Standard	Circuit
1 - 2	Tongue plate inserted	10 kΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 2	Tongue plate detached	Less than 1 Ω

Replace the inner belt assembly if the inspection result is not within the standard value.

• Passenger's seat

Check the current value between the terminals when the inner belt assembly is in each of the following operation conditions.

Terminal No.	Inspection conditions	Standard	Circuit
1 - 2	Tongue plate inserted	12 - 18 mA	Courtesy of SUBARU OF AMERICA, INC.
1 - 2	Tongue plate detached	4 - 7 mA

Replace the inner belt assembly if the inspection result is not within the standard value.