FixVault
Home › Subaru › 2013 › Outback Base, Standard Trans › Repair and Diagnosis › Transmission › Manual Trans › Manual Transaxle & Differential › Transfer Case and Extension Case Assembly › Disassembly › Transfer Case

Transfer Case

  1. Remove the interlock plate.
    NOTE: Do not remove the precoat bolt (B) if the parts are assembled as a transmission assembly. Do not reuse the precoat bolt and gasket once the interlock plate is removed.
    Fig 1: Identifying Interlock Plate And Precoat Bolt
    G08581972Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the shift link assembly. Refer to REMOVAL .
About FixVault