Transfer Drive Gear: Installation

Install the transfer drive gear.
Tightening torque:

26 N.m (2.7 kgf-m, 19.2 ft-lb)

Fig 1: Identifying Transfer Drive Gear
Courtesy of SUBARU OF AMERICA, INC.
Install the transfer driven gear. Refer to INSTALLATION .
Select a thrust washer. Refer to INSTALLATION .
Install the extension case assembly. Refer to INSTALLATION .
Install the transfer case and the extension case assembly. Refer to INSTALLATION .
Install the back-up light switch and the neutral position switch. Refer to INSTALLATION .
Install the manual transmission assembly to the vehicle. Refer to INSTALLATION .