FixVault
Home › Subaru › 2013 › Outback R Limited › Repair and Diagnosis › Engine Performance › System › Engine Controls (Diagnostics) (H6DO) › Drive Cycle › Procedure › Drive Cycle E › Diagnostic procedure

Diagnostic procedure

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. Refer to CLEAR MEMORY MODE .
  3. Drive for approximately 30 L (7.9 US gal, 6.6 Imp gal) of fuel.
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
About FixVault