FixVault
Home › Subaru › 2013 › Outback R › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Engine Control Module (ECM) › Removal

Engine Control Module (ECM): Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box lid assembly. Refer to REMOVAL .
  3. Disconnect the connectors from ECM.
    Fig 1: Locating Engine Control Module Connectors
    G06651274Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ECM from vehicle.
    Fig 2: Locating Engine Control Module Connector Mounting Bolts
    G06651299Courtesy of SUBARU OF AMERICA, INC.
About FixVault