FixVault
Home › Subaru › 2013 › Outback R › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle › Torque Converter Assembly › Removal

Torque Converter Assembly: Removal

  1. Remove the transmission assembly from vehicle body. Refer to REMOVAL .
  2. Pull out the torque converter and oil pump shaft horizontally.
    NOTE:
    • Be sure not to scratch the inside of bushing in oil pump shaft.
    • Be careful that the oil pump shaft may drawn out simultaneously.
      Fig 1: Identifying Torque Converter Assembly
      G05002574Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the oil pump shaft from torque converter as necessary.
About FixVault