FixVault
Home › Subaru › 2013 › Outback R › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle › Turbine Speed Sensor 1 › Removal

Turbine Speed Sensor 1: Removal

  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the front exhaust pipe. Refer to REMOVAL .
  4. Disconnect the turbine speed sensor 1 connector.
    Fig 1: Identifying Turbine Speed Sensor 1 Connector
    G06652012Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the turbine speed sensor 1.
About FixVault