FixVault
Home › Subaru › 2013 › Tribeca › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Injection System › Fuel Pump Control Unit › Removal

Fuel Pump Control Unit: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim (right side). < Ref. to REMOVAL , Rear Quarter Trim. >
  3. Disconnect the connector from fuel pump control unit.
  4. Remove the fuel pump control unit.
    Fig 1: Locating Fuel Pump Control Unit
    G05031081Courtesy of SUBARU OF AMERICA, INC.
About FixVault