Dismounting/Mounting Procedures: Notes

CAUTION: The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.

NOTE: It may not be possible to install tire pressure sensors on some types of wheels. Use wheels that have the same part number as the standard equipment wheels.

NOTE: When tires are rotated, a tire pressure sensor or TPM control module is replaced, or when wheels are changed, the tire pressure sensor IDs must be registered. See RESET PROCEDURES .

NOTE: The air pressure in a tire increases by about 4.3 psi (30 kPa) when the tire becomes warm. The tires are considered cold when the vehicle has been parked for at least 3 hours or has been driven less than one mile (1.6 km).