Power Window Regulator Switch Assembly (Installed To The Front Side): Removal

Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
Removal of door armrest cover RH
Remove the part in the same manner as LH side. (Refer to ASSEMBLY )
Removal of front door trim board SUB-assembly RH
Remove the part in the same manner as LH side. (Refer to ASSEMBLY )
Removal of power window regulator switch assembly W/front armrest base panel UPR RH (passenger's side door) (Refer to ASSEMBLY )
Removal of power window regulator switch assembly
1. Using a flat head screw driver wrapped in protective tape, release the 6 tabs and remove the power window regulator switch assembly from the front armrest base panel UPR RH.
  
  Fig 1: Removing Power Window Regulator Switch Assembly Using Flat Head Screw Driver Wrapped In Protective Tape
  Courtesy of SUBARU OF AMERICA, INC.