FixVault

Unit Inspection

  1. Check of neutral start switch ASSY
    1. Measure the resistance between the terminals.
      Fig 1: Identifying Neutral Start Switch Assy Terminals
      G08554419Courtesy of SUBARU OF AMERICA, INC.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      2(RB) - 6(PL) 4(B) - 5(L) Select lever in P position Less than 1 Ω
      2(RB) - 1(RL) Select lever in R position Less than 1 Ω
      2(RB) - 9(NL) 4(B) - 5(L) Select lever in N position Less than 1 Ω
      2(RB) - 7(DL)
      • Select lever in D position
      • When select lever is in M position and shifted to "+" or "-"
      Less than 1 Ω
      2(RB) - 6(PL) 4(B) - 5(L) Select lever in any other than P position 10 k Ωor more
      2(RB) - 1(RL) Select lever in any other than R position 10 k Ωor more
      2(RB) - 9(NL)
      4(B) - 5(L)
      Select lever in any other than N position 10 k Ωor more
      2(RB) - 7(DL)
      • Select lever in any other than D position
      • Except when select lever is in M position and shifted to "+" or "-"
      10 k Ωor more