FixVault
Home › Subaru › 2014 › BRZ Limited, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle (Service Information) › Transmission Shift Switch › Unit Inspection

Unit Inspection

  1. Check of transmission shift switch
    1. Resistance inspection
      1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      1 - 3 Pull the shift switch lever RH (+) side. Less than 10 Ω
      Release the shift switch lever. 1 MΩ or more
      1 - 4 Pull the shift switch lever LH (-) side. Less than 10 Ω
      Release the shift switch lever. 1 MΩ or more
      Fig 1: Transmission Shift Switch Terminals Layout
      G08554483Courtesy of SUBARU OF AMERICA, INC.
About FixVault