Unit Inspection

Transmission wire (oil temperature sensor) check

Measure the resistance between the terminals.

RESISTANCE

Inspection terminals	Inspection conditions	Standard value
9(OIL) - 1(E2)	Always	79 Ωto156 k Ω
9 (OIL) - chassis ground	Always	10 k Ωor more
1 (E2) - chassis ground	Always	10 k Ωor more

NOTE: If the resistance is out of the oil temperature range in the table below, the handling performance of the vehicle may be degraded.

RESISTANCE

Oil temperature	Standard value
10°C (50°F)	5 to 8 k Ω
25°C (77°F)	2.5 to 4.5 k Ω
110°C (230°F)	0.22 to 0.28 k Ω