Cruise Control Main Switch: Inspection

INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY

Measure the resistance according to the value(s) in the table below.

Fig 1: Inspecting Cruise Control Main Switch Assembly

Courtesy of SUBARU OF AMERICA, INC.

STANDARD RESISTANCE

Tester Connection	Switch Condition	Specified Condition
1 - 3	All switch released	1 MΩ or higher
	Cruise control Main switch Assembly (ON-OFF button) pushed	Below 2.5 Ω
	+/RES switch ON	235 to 245 Ω
	-/SET switch ON	617 to 643 Ω
	CANCEL switch ON	1509 to 1571 Ω