ECM Reprogramming Availability For DTC P0244 (11-132-13)
Publication date: 2013-07-03Reference number: 11-132-13
ECM REPROGRAMMING AVAILABILITY FOR DTC P0244
TECHNICAL SERVICE BULLETIN
Reference Number(s): 11-132-13, Date of Issue:
July 3, 2013
| SUBARU: | 2014 Forester Turbo Models |
APPLICABILITY
2014MY Forester Turbo Models
INTRODUCTION
This Bulletin announces the availability of ECM reprogramming files to address an improper judgment of intake manifold pressure when the engine is cold which could cause DTC P0244 to set. These files are included in the July, 2013 SSMIII Software Update, Version 1.38.52.7.
PACK FILE APPLICABILITY
| EMISSION SPEC. | PAK FILE NAME | NEW ECM PART NUMBER | OLD ECM PART NUMBERS | NEW CID NUMBER | TRANSMISSION |
|---|---|---|---|---|---|
| FED, CAL | 22611AW062.PAK | 22611AW062 | 22611AW060 | AF56600B | CVT |
| 22611AW061 |
COUNTERMEASURE IN PRODUCTION
| CAR LINE | MODEL | STARTING VIN |
|---|---|---|
| Forester | Turbo | E*439234 |
SERVICE PROCEDURE/INFORMATION
IMPORTANT:
In the event of an ECM replacement, always confirm the new ECM has the most recent software and CID number installed before releasing the vehicle.
WARRANTY/CLAIM INFORMATION
For vehicles within the Basic New Car Limited and/or Emissions Warranty period, this repair may be claimed using the following information:
| LABOR DESCRIPTION | LABOR OPERATION # | FAIL CODE | LABOR TIME |
|---|---|---|---|
| MFI OBDII ECM Reprogramming | A455-288 | UPG-48 | 0.4 |