FixVault
Home › Subaru › 2014 › Forester 2.0XT Touring, 4D Utility › Repair and Diagnosis › Maintenance › Procedures › General Information › Engine Coolant › Inspection

Engine Coolant: Inspection

CAUTION:
  • Do not use water instead of coolant.
  • < Ref. to ENGINE COOLANT , RECOMMENDED MATERIALS, Recommended Materials. >
  1. Park the vehicle on a level surface.
  2. Make sure the engine coolant level in the reservoir tank is between "FULL" and "LOW" when the engine is cold.
    NOTE: If the engine coolant level drops, make sure that there are no engine coolant leakage, and add engine coolant to the "FULL" line.
    Fig 1: Identifying Engine Coolant Level (Full/Low)
    G09475436Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the radiator cap and make sure that the radiator is filled with engine coolant up to the filler neck position.
About FixVault