FixVault
Home › Subaru › 2014 › Impreza WRX STI Limited › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Keyless Entry Control Module › Removal › 4 Door Model

4 Door Model

  1. Disconnect the ground cable from battery.
  2. Remove the rear shelf trim. < Refer to REMOVAL , Rear Shelf Trim. >
  3. Disconnect the keyless entry control module connector.
  4. Remove the bolt and then remove the keyless entry control module.
    Fig 1: Identifying Keyless Entry Control Module
    G05663709Courtesy of SUBARU OF AMERICA, INC.
About FixVault