MODELS WITHOUT EyeSight

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The spot map light is a single unit with the overhead console.

Disconnect the ground cable from battery.
Remove the overhead console assembly.
1. Push and open the rear end of the overhead console lid, and remove the screws.
2. Remove the clips and pull out the overhead console to disconnect the connectors.
  
  Fig 1: Removing Overhead Console Assembly
  Courtesy of SUBARU OF AMERICA, INC.
Release the claws, then detach the spot map light cover and bulb.
CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.

Fig 2: Locating Spot Map Light Cover And Bulb
Courtesy of SUBARU OF AMERICA, INC.