Abs Warning Light Does Not Go Off: Trouble Symptom
When starting the engine, the ABS warning light is kept ON.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 READ DTC. Read the DTC. < Refer to READ DIAGNOSTIC TROUBLE CODE (DTC) . > |
Is DTC displayed? | Perform the diagnosis according to DTC. < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 2 . |
| 2 CHECK LAN SYSTEM. Perform the diagnosis for LAN system. < Refer to BASIC DIAGNOSTIC PROCEDURE . > |
Is there any fault in LAN system? | Perform the diagnosis according to DTC for LAN system. < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 3 . |
| 3 CHECK COMBINATION METER. Check the combination meter. < Refer to SELF-DIAGNOSIS DISPLAY MODE , OPERATION, Combination Meter System. > |
Is combination meter OK? | Replace the VDCCM&H/U. < Refer to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM&H/U) . > | Replace the combination meter. < Refer to COMBINATION METER . > |