FixVault
Home › Subaru › 2014 › Outback 2.5i, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 5 (Glass/Window/Mirrors) › Power Window System › Operation › Reset Operation A

Reset Operation A

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Sit in the driver's seat and close the door.
  2. Turn the ignition switch to ON.
  3. Operate the switch - power window main to open the glass assembly - front door halfway.
  4. Operate the switch - power window main in "UP" direction to fully close the glass assembly - front door on the driver's side.
  5. While the glass assembly - front door is fully closed, hold down the switch - power window main in "UP" direction for one second.
  6. Operate the switch - power window main in "AUTO DOWN" direction to check whether the window fully opens properly.
    NOTE: If the window does not fully open properly, repeat steps  1) to  6).
About FixVault