Auto Headlight Beam Leveler Cm
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal No. (terminal symbol) | Item | Measuring condition | Standard |
|---|---|---|---|
| 1 (IG) ←→ Chassis ground | Voltage | Ignition switch ON | 8 - 16 V |
| 2 (E1) ←→ Chassis ground | Resistance | Always | Less than 1 Ω |
| 3 (SGR) ←→ Chassis ground | Resistance | Always | Less than 1 Ω |
| 6 (WNG) ←→ Chassis ground | Voltage | After turning the ignition switch to ON, for 3 seconds (warning light on) → after 3 seconds (warning light off) | Less than 1.35 V → 8 - 16 V |
| 10 (LH1) ←→ Chassis ground | Voltage | Ignition switch ON | 10 - 16 V |
| 11 (LH3) ←→ Chassis ground | Resistance | Always | Less than 1 Ω |
| 12 (SBR) ←→ 3 (SGR) | Voltage | Ignition switch ON | 4.75 - 5.25 V |
| 17 (LH2) ←→ Chassis ground | Voltage | Headlight off → on | Less than 1 V → 1.0 - 14.4 V (for 17 seconds) |
| Headlight on, no vehicle height change → change and hold vehicle height for 3 seconds or more | |||
| 19 (SHR) ←→ Chassis ground | Voltage | IG ON (with no passenger, no load and vehicle stopped) | Approx. 2.5 V (changes according to vehicle condition) |
| 23 (CAN-H) ←→ Chassis ground | - | Cannot be measured (CAN communication line) | - |
| 24 (CAN-L) ←→ Chassis ground | - | Cannot be measured (CAN communication line) | - |