Clear Memory Mode: Operation: ECM

On the «Main Menu» display, select {Each System Check}.
On the «System Selection Menu», select {Engine Control System}.
After engine type information is displayed, select [OK].
On the «Engine Diagnosis», select {Clear Memory}.
When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedure, refer to the " Subaru Select Monitor" operating information.