FixVault

LH Side

  1. Remove the clip (A), lift the front of the collector cover in the direction of arrow, and then remove the collector cover.
    Fig 1: Removing Front Collector Cover
    G09479721Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the ground cable from battery.
  3. Remove the intercooler. < Ref. to REMOVAL , Intercooler. >
  4. Remove the throttle body. < Ref. to REMOVAL , Throttle Body. >
  5. Remove the bolts securing the engine harness.
    Fig 2: Locating Engine Harness Mounting Bolts
    G09479729Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector (A) from the knock sensor, and remove the knock sensor from the cylinder block.
    Fig 3: Locating Knock Sensor Connector Mounting Bolt
    G09479753Courtesy of SUBARU OF AMERICA, INC.