Function Check: List

On «Main Menu» display, select «Each System Check».
On «Each System Check» display, select «Integ. unit mode».
On «Integ. unit mode» display, select «Work Support».
On «Work Support» display, select «Active Test».
Select an item to be operated on «Active Test» display, and press the [OK] button.

Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.

Item	Display	Note
lock actuator LOCK output	ON/OFF	-
All seat UNLOCK output	ON/OFF	-
R gate/trunk UNLOCK output	ON/OFF	-
Shift lock solenoid output	ON/OFF	-
Key lock solenoid output	ON/OFF	-
Keyless Buzzer Output	ON/OFF	-
Horn Output	ON/OFF	-
Panic Braking Hazard Light Setting	ON/OFF	-

NOTE:

If not equipped (depending on destination area or vehicle equipment condition), process will not go on.
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".