Inspection Mode 2

Diagnostic procedure:

1. Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
2. After turning the ignition switch ON → OFF, wait for one minute or more.
3. Read the DTC and check that the DTC is not displayed. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>
4. Initialize the power seat system. <Ref. to INITIALIZATION PROCEDURES , ADJUSTMENT, Power Seat System.>
5. Turn the ignition switch OFF → ON, and wait for 5 seconds or more.
6. Read the DTC and check that the DTC is not displayed.
   NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.