FixVault
Home › Subaru › 2015 › Outback 2.5i › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Power Window Control Switch › Removal › Sub-Switch › Switch - power window sub rear

Switch - power window sub rear

  1. Remove the ground terminal from the battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the trim panel - rear door. <Ref. to REAR DOOR , REMOVAL, Door Trim.>
  3. Remove the panel - power window sub switch rear.
CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
  1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
  2. Remove the screws.
    Fig 1: Locating Screws
    G10272707Courtesy of SUBARU OF AMERICA, INC.
  3. Release the claws, and then remove the panel - power window sub switch rear.
    Fig 2: Removing Panel - Power Window Sub Switch Rear
    G10272708Courtesy of SUBARU OF AMERICA, INC.
  4. Release the claws, and then remove the switch - power window sub rear.
    Fig 3: Removing Switch - Power Window Sub Rear
    G10272709Courtesy of SUBARU OF AMERICA, INC.
About FixVault