Basic Diagnostic Procedure: Procedure

DIAGNOSTICS PROCEDURE

Step	Check	Yes	No
1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how trouble occurs. <Ref. to CHECK , Check List for Interview.>	Did you interview the customer?	Go to step 2.	Interview the customer. <Ref. to CHECK , Check List for Interview.>
2 CHECK CAN COMMUNICATION. Read the DTC of the CAN system using the Subaru Select Monitor. <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).>	Is DTC displayed?	Perform the diagnosis according to DTC. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).>	Go to step 3.
3 CHECK COMBINATION METER. Using the Subaru Select Monitor, read DTC of combination meter. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>	Is DTC displayed?	Record DTC and time stamp, and perform the diagnosis according to DTC. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).> For time stamp, refer to "LAN SYSTEM". <Ref. to TIME STAMP , CAUTION, General Description.> Go to step 5.	Go to step 4.
4 CHECK COMBINATION METER. Check the operation of combination meter. <Ref. to SYSTEM OPERATION CHECK MODE .>	Is it operating normally?	System is normal.	Replace the combination meter. <Ref. to COMBINATION METER .>
5 PERFORM DIAGNOSIS. Perform the Clear Memory Mode. Perform the Inspection Mode. <Ref. to INSPECTION MODE .> Using the Subaru Select Monitor, read DTC of combination meter.	Is DTC displayed?	Perform diagnosis according to the DTC.	Finish the diagnosis.