Multi-Function Display Switch
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Standard 2 - 3 (UP)
ENTER
(DOWN)All OFF Approx. 1 MΩ or more 2 - 3 (UP) ON Less than 1 Ω 2 - 3 ENTER ON Approx. 1000 Ω 2 - 3 (DOWN) ON Approx. 3670 Ω - If the inspection result is not within the standard, replace the switch - multi-function display.