FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System (Diagnostics) › Registration Body Integrated Unit › Operation › Destination Setting

Destination Setting

NOTE: For the vehicle requiring the destination setting, if the destination setting is not finished, display can not be shifted into customizing screen.
DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CONFIRM CURRENT SETTING. 
Always perform confirmation of current setting before replacing the module.
Record the contents of the "Destination Setting".
NOTE: Refer to the "Read Current Data" and "CONFIRMATION OF CURRENT SETTING" to confirm the current setting. <Ref. to CONFIRM CURRENT SETTING , OPERATION, Registration Body Integrated Unit.> <Ref. to OPERATION , Read Current Data.>
 Is the current setting recorded? Go to step 2  . Confirm the current setting. Go to step 1  .
2 CONFIRM DESTINATION SETTING. 
  1. Connect the Subaru Select Monitor, and run the application.
  2. On «Main Menu» display, select {Each System Check}.
  3. On the «System Selection Menu» display, select {Integ. unit mode}.
  4. On «Integ. unit mode» display, select {Work Support}.
  5. On «Work Support» display, select {Unit customizing}.
  6. The vehicle destination screen is displayed.
 Is the vehicle destination setting screen displayed? Go to step 3  . Go to step 4  .
3 CONFIRM DESTINATION SETTING. 
Confirm the screen displayed on Subaru Select Monitor and the actual vehicle destination.		 Is it necessary to change the destination setting? Select [Yes]. Go to step 4  . Select [No]. Go to step 5  .
4 ENTER DESTINATION CODE. 
Enter the appropriate code in the screen.
JPN: JP00
KA, KC: KA00
KS: KS00
U4, U5, U6, C6 and C0, C5 (with keyless access): U400
C0, C5 (without keyless access): C000
EK, ER: EK00
Other than above: EC00		 Is the appropriate code entered? Select [Yes]. Go to step 5  . Enter the destination code. Go to step 5  .
5 REGISTER VEHICLE EQUIPMENTS. 

Customizing screen is displayed.

NOTE: Match the each item setting of body integrated unit registration item list with the vehicle equipments.
 Do all setting contents match with the vehicle equipment specification? Go to step 6  . Change the items until each content setting match with the vehicle equipments specification. Go to step 6  .
6 CONFIRM MARKET MODE. 
  1. Customizing screen, select the {Factory initial setting} to change the setting from "Factory" mode to "Market" mode.
  2. Turn the ignition switch to OFF.
    NOTE: When the setting is changed from "Factory" mode to "Market" mode, turning the ignition switch from ON → OFF confirms the setting.
  3. Turn the ignition switch to ON, and check the contents of settings.
 Is the mode changed to "Market" mode? Go to step 7  . Perform the destination setting from the first step. Go to step 1  .
7 CONFIRM MARKET MODE. 
Check the following.
Make sure that the "Destination Setting" in the current data display is the same as the one you confirmed in step 1  .		 Is the display the same as indicated? Registration of body integrated unit is finished. It is possible that harness malfunction may occur. Perform the diagnosis.
About FixVault