Rear Seat: Installation

Install the backrest assembly RH and LH.
Tightening torque:

33 N.m (3.4 kgf-m, 24.3 ft-lb)
NOTE:
- After installing the backrest assembly, make sure that each seat belt operates normally.
- Make sure that they are properly secured on each hook on the vehicle side.
Install the rear seat cushion assembly.
Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
NOTE: For models other than STI model, connect the ground terminal to battery sensor.

Tightening torque:

Refer to "COMPONENT" of "General Description". <Ref. to REAR SEAT , COMPONENT, General Description.>