Combination Meter: Installation
CAUTION:
- Make sure the electrical connector is connected securely.
- Make sure that each meter operates normally.
- When the combination meter assembly has been replaced, be sure to perform the following operations.
- For keyless entry model except for C0, be sure to perform the registration of immobilizer. For the relevant procedures, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".
- Be sure to reset the ODO fuel economy value of the multi-function display (MFD). <Ref. to ODO FUEL ECONOMY VALUE RESET , OPERATION, Multi-function Display (MFD) System.>
- Install the combination meter assembly.
- Install the visor - combination meter.
- Connect the battery ground terminal. <Ref. to
BATTERY
, NOTE, Note.>NOTE: For models other than STI model, connect the ground terminal to battery sensor.