RH Side

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the spark plugs using a spark plug socket.
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Install the ignition coil.
CAUTION: Degrease the ignition coil fixing portion and the ignition coil mounting bolt.

Tightening torque:

8.0 N.m (0.8 kgf-m, 5.9 ft-lb)
Connect the connector to the ignition coil.
Install the air cleaner element and air cleaner case (rear). <Ref. to INSTALLATION , Air Cleaner Element.>
Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>