Paddle Shift Switch

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Fig 1: Paddle Shift Switch Connector Terminal Identification

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
3 - 4	Operate the + side of paddle shift assembly and hold it.	Less than 10 Ω
1 - 4	Operate the - side of paddle shift assembly and hold it.	Less than 10 Ω
1 - 4 3 - 4	Do not operate the paddle shift assembly.	Is the resistance 1 MΩ or more?

Replace the paddle shift switch if the inspection result is not within the standard value.